Dodge 1500 4.7L
The truck is stalling out I put it on a
computer and the only code it read was cam
position sensor I replaced that and it was
still running rough so I took the exhaust off
thinking the Cadillac converter was clogged
but it still runs rough and has no power and
idles rough I was thinking it might be the
fuel pump or filter but it's still running jus
runs rough any suggestions?
when was your last tune up? You may have to have someone with a scanner that can read live data hook up to your computer. this can tell you if you have a fuel or electrical issue.
The cam and crank sensors are known failures on this engine, so your half way there, my 4.7 would start to run rough then just die, coast to a stop and it would restart and run fine for a few minutes then run rough and die again, replaced both the cam and crank sensors and no more problems. Crank sensor can be a bit of a bear to get out, and it is behind the starter. HTH
Search Dodge Ram 1500 Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Dodge Ram 1500 Experts