I have a 2003 dodge ram 1500. 4x4 light turns on in 4 Hi and 4 Lo. but is not engaging into 4 wheel.
Does this have manual hubs or axles?
it has axles. it has the shifter and not the push button
These have a small stub shaft that comes out of the front end. They are known for stripping the teeth on them. You have to take the front cover off, take the 5/16 head bolt out, slide the pin out, take the half moon retaining clip out and pull the axle
You also have to pull the wheel, caliper, rotor, wheel bearing off too.
I do have another front end I can put in it. Just don't have the time to do so. How much would that part cost to replace
I think it is somewhere around $100 for the part but the labor $$$$
do I pull driver or passenger side apart
It has been a while but I think passenger. You can tell by the little short shaft coming out of the front end with joint. Once you get the cover off you will know.
Ok thanks for the help
glad to help
I think I am in the same situation. I'm sure I really screwed my 4x4. The 4x4 light comes on but doesn't engage. What is the part I need to repair it?
Looking for a Used Ram 1500 in your area?
CarGurus has 9,546 nationwide Ram 1500 listings starting at $1,750.
Search Dodge Ram 1500 Questions
Dodge Ram 1500 Experts
Related Models For Sale
Used Cars For Sale