97 DODGE 1500 TRUCK ALTERNATOR NOT CHARGING P743, P1765
rEPLACED ALTERNATOR , BATTERY, STILL DOESN'T CHARGE AND HAVE P0473
AND P1765 CODES. FIRST GEAR WORKS FIRST TIME YOU TAKE OFF BUT WON'T
GO INTO 4TH THEN IT STARTS TO DIE
P1765 DODGE - Gov Press Not Equal to Target @ not15-20 PSI
P0473 - Exhaust Pressure Sensor High - An Exhaust Back Pressure (EBP) signal that is detected out of range (high or low) by the Engine Control Module (ECM) will cause the engine to ignore the EBP signal and disable exhaust back pressure operation. - Replacing the exhaust back pressure sensor usually takes care of the problem
Alternator not charging - can you read battery voltage on the output terminal of the alternator? There usually is a fusible link in the piece of wire that attaches to the starter motor. If that link goes open, the alternator is not connected.
Located a pcm module finnaly and replace it and now it is charging and transmission error codes are gone. Dodge relly blew this one putting the voltage regulator in the pcm Thanks for your help.
Looking for a Used Ram 1500 in your area?
CarGurus has 10,771 nationwide Ram 1500 listings starting at $1,500.
Search Dodge Ram 1500 Questions
Dodge Ram 1500 Experts
Related Models For Sale
Used Cars For Sale