i have a 96 ram 1500. i have no spark at coil, have replaced coil,cap,wires,plugs,cranksensor,rotor,computer, and still nothiing, i am lost could someone help me
i have replaced coil,cap,wires,plugs,cranksensor,rotor,computer, i was looking at all my ground wires and i noticed that my ground on starter feel out of starter but it would still turn the motor over but still no spark, would this cause no spark, if no what else would it be. i have replaced as far as i kno everything that has to do with spark.
Have you replaced the cam sensor? Did reconnecting that ground help?
yes i have replaced camsensor,cranksensor,cap,wires,plugs,tps,iac,computer,coil,and the starter. still have no power to coil idk whats going on with it.
Check continuity at the ignition switch?
Just Had the Same problem. MAKE SURE THE CAM SENSOR AND CAM SENSOR ARE TIGHT!!! Found mine to be loose, Tightened it up and ran great! Good Luck
I have no fire
You probably have a bad distributor try changing the pick up coil in the distributor
Looking for a Used Ram 1500 in your area?
CarGurus has 10,796 nationwide Ram 1500 listings starting at $1,950.
Search Dodge Ram 1500 Questions
Dodge Ram 1500 Experts