I need help with my 05 neon SRT4 built.
I need help with my 05 neon SRT4
built supposedly but this is what it
have in the motor (Precision 6262
Dw 1000cc injectors
Crane 16 cams
Walbro 400 pump
Perrin fuel rail
agp solid mounts
18in msr wheels
Aem wide band
Act 6 puck clutch
3 bar map and tip sensor)
But it's over heating and my ac
bracket mount won't bolt up to my
bottom engine mount do I need to
relocate my mount? This is my first
built srt4 but had stock one before.
i'll start with the mount, is it a stock or aftermarket mount? if its stock it should be pretty straight foreward, you may have to put a jack under the engine to get it to line up properly. if its an aftermarket mount you must remove the factory dowel on the bracket before you install the mount. as for the overheating, without further details its hard to diagnose. could be air trapped in the system, bad rad cap, bad thermostat, water pump, or even a clogged rad. I'm assuming the fans work?
Search Dodge Neon SRT-4 Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Dodge Neon SRT-4 Experts