ok i have an 03 srt 4 and i have 3 codes i know of one being the camshaft sensor i
replaced it 2 times and its still giving me that code. i don't know if its not making a good
connection with the interpreter magnet or if its the wire. the other one is turbo over boost
idk what to do on that one and the other one is p1188 which it says no information is
available. can i get advice on is on what i should do?
get a NEW battery...possibly NEW cables too, depending on the level of degridation...(if a salt...wet) will be corroded....also the amperage required actually "welds" itself to the chassis/frame...what you need to do is wirebrush this corrosion off with a wirebrush...with good chassis ground and a 300 amp capability for the starter motor you should be okay...reset the codes, the computer will not be happy with "brown" power [varying available voltages and variable available amperages] such that critical voltages aren't gettin' there on time...YOU will correct this situation by providing sufficient grounding~...understood?~
got it? reset with the ignition switch and trip odometer button held down....~
Looking for a Used Neon SRT-4 in your area?
CarGurus has 56 nationwide Neon SRT-4 listings starting at $2,500.
Search Dodge Neon SRT-4 Questions
Dodge Neon SRT-4 Experts