95 s10 fuel problem
Hey guys ive got a good question for you. I have a
95 chevy s10 with the 2.2 multi port injection. My
problem is i cant get the truck started. I know its
getting spark because i can run it off ether. I know
fuel is getting to the injectors. And i know that all
of the injectors are getting the voltage they need.
But my engine isnt starting. The fuel pump
wouldnt run for some reason so i just installed an
aftermarket switch and wires. I tried replacing the
pump and relay but no luck. I found out that the
relay wasnt grounding out to complete the circut.
My question is this. Does the trucks computer
have a way of stopping the fuel pump and the
injectors from getting the ground they need. And if
so is there a way to reset the computer. Ive pulled
the battery multiple times but no luck. Please any
advice is helpful.
Try swapping your pcm. go to your local junkayard you could get one for around 20-30 bucks worth a shot!
Have you checked the fuel filter?
Search Chevrolet S-10 Questions
Chevrolet S-10 Experts