New alternator and new battery wont stay running
Couple of days ago my vehicle was losing power as i was
driving so i pulled off to the side of the road and turned my
truck off. Turned the truck back on and hears click click. So
i replaced the battery and it worked for a few days. Then
yesterday had the alternator checked and it was only
putting out 11.4 volts. So i replaced that and now the truck
will start but wont stay running. It will start up then shut
back off. I have an 02 ford with the 5.4. Any help here
would be amazing thanks.
Check all connections and double check to make sure you didn't accidentally disconnect a sensor and check air filter.
Update: there was 2 hoses coming off of my air intake that run towards the back of the engine and there was too much air getting into the intake so i reconnected those and it started up and stayed running.
Yey i get some points!
Seems the pollution control system on the vehicle is working properly.
Looking for a Used F-150 in your area?
CarGurus has 205,088 nationwide F-150 listings starting at $1,779.
Search Ford F-150 Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Ford F-150 Experts