bought a 93 ford f150 xl
I do believe the clutch is going out because if i get on the gas in 4th or 5th
gear it just revs up. I can slowly get on it and its fine. any ideas on what all
Probably needs clutch, pressure plate, throw out bearing, flywheel resurfaced, and pilot bearing. Also I would make sure the rear main seal is not leaking as getting oil onto the clutch friction material will make it slip. How many miles on this F-150?
It has 126,000. It's been fine the past few days it's only when I put the pedal down fast that it slips and revs up. I'm just not sure what all I need to buy
Not sure if they still had manual adjustments on the clutch in 83, but if it does, try adjustment.
I meant 93.
theirs not i've looked, any particular brands that would be best to buy and what size pressure plate and clutch plate do i need 10" or 11". what is the difference between the two
10" or 11" refers to the diameter of the clutch disk. I am not sure, but it is possible that only one will fit. If both fit I would get the larger model. NAPA or O'reillys would be good sources for parts.
Before taking it apart check the clutch slave cylinder to see if it is holding pressure against the clutch causing it to slip. I am pretty sure your truck has a hydraulic clutch, but not certain.
Looking for a Used F-150 in your area?
CarGurus has 208,275 nationwide F-150 listings starting at $1,200.
Search Ford F-150 Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Ford F-150 Experts