I have a 92 F-150 with two fuel pumps,the truck cut off while I was using it, and has not started back up yet.we checked the wiring harness,fusible link,tank selector switch,initia switch,all has power were we checked,so can you guide me in another direction,anf if so is it some way I can junp the pump to make sure they are both working,and to ease my mind that grimlins did not make both pumps go out on me.thank

I have a 92 F-150 with two fuel pumps,the truck cut off while I was using it, and has not started back up yet.we checked the wiring harness,fusible link,tank selector switch,initia switch,all has power were we checked,so can you guide me in another direction,anf if so is it some way I can junp the pump to make sure they are both working,and to ease my mind that grimlins did not make both pumps go out on me.thank 2 Answers

I have a 1989 F/150 302, I am not getting power to the High Pressure fuel pump, I am not sure about the low pressure pumps power, I just replaced the saddle in-tank pump to no avail, I did remove the high pressure pump amd confirmed that it was working with 12 volt battery, I am not sure where to go from here, the truck has set for years and was given to me, I really want to get it runnung, does anyone have the quick fix? Thanks 14 Answers

I have a 1989 F/150 302, I am not getting power to the High Pressure fuel pump, I am not sure about the low pressure pumps power, I just replaced the saddle in-tank pump to no avail, I did remove the ...

I have a 92 F150 with two fuel pumps,both stoped working at the same time,can you tell me what might be the proble? 4 Answers

I have a good fuse,I was told there is a fuseable link some were on the battery side,I can't find it,my reserch was the flow of voltage was from the fuse to the initia switch in the right side foot c...

MMy dad has a 1992 Ford straight 6 flare side and I know there is a safety switch on the clutch and he has to slam the clutch almost through the floor to get the truck started. How can he fix this and can it be adjusted. One friend told me and I saw it online another place that you can dissasemble it and wire it back together bypassing the safety switch. I need some advice on the best and or cheapest way to fix it. Thanks 5 Answers

MMy dad has a 1992 Ford straight 6 flare side and I know there is a safety switch on the clutch and he has to slam the clutch almost through the floor to get the truck started. How can he fix this ...

a friend has a 5.4 out not sure what it came out of i have 2006 150 and knowing the 8th number on my vin is a v but how can i tell on a motor that i have no idea what it came out of where are marking on engine to let me know if it will fit 1 Answer

got access to a engine 5.4 out of a wreck they just don't remember what wreck they are wrecker service i need a 5.4 my vin on truck says i need motor with eighth digit being a v how can i look at a ...