I am working on a 94 V8 F 250 with a V8 And am using the wiring harness off a 96 F 150 with a 6 cylinder Te connections were different to the computer can I use the ECM from the 6 cylinder with a V8

I am working on a 94 V8 F 250 with a V8 And am using the wiring harness off a 96 F 150 with a 6 cylinder Te connections were different to the computer can I use the ECM from the 6 cylinder with a V8 1 answer

I had to switch out wiring the wiring harness in a 94 F250 with the wiring harness out of a 96 F150 which had a 6 cylinder in it. The ECM connections were not the same to the ECM . Can I use the ECM...

what light bulb shine the brightest for headlights on a ford f-150&f-250 trucks 2 answers

I SOMETIMES HAVE PROBLEM THINKING THE LIGHTS ARE NOT BRIGHT ENOUGH IN THE EARLY MORNING GOING TO WORK

The rear gas tank filler hose is rubber with a flat portion to go beneath the frame. Is this hose different from the standard F-250 hose? Or may I use the standard hose found in LMCtruck.com etc. 1 answer

can you adjust the clutch on a single cab 2 wheele drive ford f-250 1 answer

it feels like the clutch needs to be tightened, when i have the clutch all the way to the floor board it is hard to get into gear, when i do get it into gear and release it to start going the clutch...

Has any one come up with a good solution for a fuel tank switch-over valve to replace the factory 6-port POS? 4 answers

1987 Ford F-250 - 7.5L - 4bbl - 4X4 - dual fuel tanks and electric in-tank pumps