2005 to get a score
My 4wd drive button was pushed
accidentally on my 2005 Toyota Sequoia
after that it will not drive or take reverse
what could it be
Most likely the transfer case is in neutral, you can try tapping on the transfer case shift motor while someone is pushing the 2WD button, if your lucky it will run just enough to put you transfer case back into 2WD mode. Note this should be done on flat level ground with the tranny in neutral so make sure the wheels are blocked so you don't become a statistic. If you can't get it to run you can remove it and manually put it in 2WD and then duct tape the opening and disconnect the motor assembly just to make sure you get the right one for replacement.
Search Toyota Sequoia Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Toyota Sequoia Experts