2006 Chevy Impala lt. My negative cable
doesn't tighten. I was told that I needed
the whole cable replaced. Spendy Can I
just have the terminal replaced with out
having to replace the whole cable?
You can replace just the end but most clamp on ends have a lot of problems with corrosion and becoming loose. There are high quality ends but I have never seen them in an auto parts store. Here is one I have found but they are expensive --- http://www.gemplers.com/product/WEB223724/QuickCable- Straight-Clamp-Fusion-Battery-Connectors
Those you suggest are indeed MUCH better FoR. We were posting at same time.
Yes, you can. If the cable is long enough. The terminal can be cut off and copper wire stripped and use one like this that clamps on cooper wire
Gemplers also has some really high quality clamp on ends with compression fittings. Not cheap but nice.
yes...do both!!!!!and check the other snds,,...,,.why not.
The one above with the picture is a easy fix. Make sure you ask for a electrical connection grease that will help with corrosion problems.
Looking for a Used Impala in your area?
CarGurus has 29,204 nationwide Impala listings starting at $1,300.
Search Chevrolet Impala Questions
Chevrolet Impala Experts