HOW DO YOU LOWER CONVERTABLE TOP

Just found this answer to a similar question someone else asked a while back: "There are four Torx head bolts. There are two by the windshield, hidden up in the holes behind the sun visor and the other two are toward the rear. The bolts by the windshield do not come out, just loosen them. The bolts toward the rear come out. Your Vette should have come with a tool for removing these bolts. I would look in the glove box or check with the person you bought it from. If that doesn't work, GM sells the wrench for around $70.00 or you can buy the correct #40 Torx head bit from any tools supplier. Note: Make sure your 'vette is on level ground when putting the top back on, this will make it line up correctly." Hope that helps!