my 2003 grand am cant get no brakes tryed to bleed them wont work but there is brake only when i put her in netural but in drive and reverse brake goes to floor
If the master cylinder went dry on brake fluid, then air is trapped in the ABS control module, and a shop would have to bleed the air out since it takes a computer to do this. Otherwise it could be the master cylinder is bad.
Try bleeding the brakes with the key on, then look on the ABS unit and see if there are any bleed screws on it, if so bleed those first, and then start with the bleeder the farthest away from the master cylinder, usually the right rear, then left rear, then right front and finally left front.
Search Pontiac Grand Am Questions
Pontiac Grand Am Experts