2002 Pontiac Grand AM SE with GM 2.2L with no spark
I have no spark, I have changed the crankshaft sensor still the socket that
goes inside the ICM does not have a signal other that the hot wire when i
crank the car. Is there any other sensors that might be causing this to shut
down ignition .. Also is there anything in the fusebox that i need to check? i
have checked the coil and the ICM and they work but no signal comeing to
it please help
Does that car have a distributor on it? Where is the ignition control module, If it is distributed this would be under the cap, because I am thinking the coil pick-up. Never the less, there is a piece that allows the coil to discharge it's spark.
Did u ever find out ur problem with the grand am. I have the same issue. Please help if u can
yes, there was a major issue with the control unit grounding and by the time i found out i already fried my control unit .. so i bought a one online and sent it to the dealership to get the control unit programmed to the VIN and the fixed the ground and starts right away
Looking for a Used Grand Am in your area?
CarGurus has 1,085 nationwide Grand Am listings starting at $1,500.
Search Pontiac Grand Am Questions
Pontiac Grand Am Experts