Cruise control stopped working
2003 Grand Marquis ... cruise control was first intermittent, then just sopped working. Beyond the fuse, where do i begin to trouble shoot the problem?
First has it had been in for the recall? The cruise control TSB "fire hazard" the Ford Dealer will splice into the harness and install a 2-3amp fuse in the cruise control circuit. If this has been done run the self diagnostic test, Check the connector that slips over the retainer on the SERVO control... on many there broken and not making good contact. There are two "prongs" with a "bridge" holding the two prongs together. The "bridge" on some are broken and do not make sufficient contact. Use a "zip" tie to secure the connector in place or replace the connector No more problem. This is done after people replace a few parts without paying attention to the simplest details.
Search Mercury Grand Marquis Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Mercury Grand Marquis Experts