Spindles with ABS?
I had to order spindles for my car, But they asking me if my spindle have with
ABS or without ABS?? I'm not really sure. I looked couldnt find.
Look for a small electrical wire going into the knuckle/spindle. Usually located right behind the rotors near the top.
in your instruction manual will be a chapter on the ABS...cannot imagine a vehicle without that~
never had these in the good ole days....like really do not want the computer pressin' the brakes willy-nilly to keep my car on the road...think that I've got enough driving skill to not burn up my brakes prematurely...thank you~
Yep, agree with Rocklobsta, just look for a wire that would run and plug into the wheel sensor behind the front rotor. If there is a wire, then you would have the ABS system.
how about Airbags then...pop n' win...a broken tooth or separated cornea~ yes safety first!~
I would not recommend tinkering with the SRS system. When I was working at the Honda dealer and was replacing them daily due to the recall, one of the guys purposely blew one up when it was out of the car. You WILL need some new pants.
Replacing spindles should not interfere with the ABS if equipped, as long as you don't have a problem in disassembly with the wheel sensors.
Thank you all! I get it now. much appericates!!!
Looking for a Used Town Car in your area?
CarGurus has 2,160 nationwide Town Car listings starting at $1,700.
Search Lincoln Town Car Questions
Lincoln Town Car Experts