No power to fuel pump
Here is how everything started. The car was
running fine, except a noise from the
tensioner pulley. I replaced the pulley and
noticed a wobble in the balancer, so I
replaced it as well. Put it all back together
and the car wouldnt start. Cranks really
good but wont fire, so I suspected while
changing balancer I may have damaged the
Crank position sensor, changed it and same
thing. I have checked all fuses and relays,
checked the fuel cutoff switch. While going
through all of this I realized I never heard
the pump kick on while attempting to start.
Pulled the pump and it bench tests good, no
power at socket. Also there is no powe
across several of the ECU terminals on the
fuse block under the hood, as well as the
Where should I check and what should I
Possible that the ECU is fried?
ecu#1, #2, B+, and st sig terminals have no power
If you did not disconnect the battery before starting the repairs check the fuses in the under hood fuse box first. Some vehicles also have a hidden ECU fuse under the dash on the driver's side near the steering column. Also check for a burned out fuseable link at the starter. In most cases car circuits are hot and the ECU provides the ground to make the devices work. The hot sides of the circuits are fused. HTH. -Jim
All fuses and links aee good
I am having the same problem
I am too
I am too
Looking for a Used Santa Fe in your area?
CarGurus has 14,283 nationwide Santa Fe listings starting at $1,475.
Search Hyundai Santa Fe Questions
Hyundai Santa Fe Experts
Related Models For Sale