I got a 94 GMC 1500 4x4 Extended Cab & I put all new brake & brake cylinders &
brake line all the way to the master cylinder also I replace the brake line on the front,
with new rotors, brake caliper & pads on my Truck & after I was done bleeding all the
brake I still had no brake. What am I doing wrong?
pump the brakes look for a leak somewhere
I have done all of that & no leak
sometime a new master cylinder is very hard to get all air out , thats why they give you tubeing with it to bench bleed the master cylinder
From what I am reading you have rear drum brakes did you adjust the shoes out to lightly touch the drums. There should be a slight drag when you spin the axle.
I didn’t put a new master cylinder only ran new line up it Joe
Looking for a Used Sierra 1500 in your area?
CarGurus has 65,682 nationwide Sierra 1500 listings starting at $1,995.
Search GMC Sierra 1500 Questions
GMC Sierra 1500 Experts