When I have my clutch depressed and not in gear my clutch rattles and sounds bad. Any ideas on what's wrong please let me know.
throwout baring may be bad... or worn out pressure plate.
The clutch and throw out bearing was replaced not that long ago. It also made that noise right after it was replaced. Also it has a hard time going into revearse without grinding a little.
If its hard to go into all the gears and just not reverse then the clutch engaging. If the clutch system is new then the only advise i could say is pull the tranny off and make sure everything is lined up right and the torque on the bolts are within spec. Everything is good then its not the clutch system, but maybe the tranny itself. I did a clutch job one time and had everything back together, and when i would drive it would have a weird noise and jerk in the truck. Came to found out that one of my sockets was on a pressure plate bolt.... talk about embarrassment.
Its just in revearse. Thanks for your help.
Looking for a Used Sierra 1500 in your area?
CarGurus has 68,500 nationwide Sierra 1500 listings starting at $1,800.
Search GMC Sierra 1500 Questions
GMC Sierra 1500 Experts
Related Models For Sale
Used Cars For Sale