I have a 2004 pt cruiser and the motor slung a rod and I'm going to replace everything the motor, trans, the fire wall computer and the computer on the ignition switch and keys its self
I found a 08 pt cruiser can I use all of it to
switch it to make it all the same to make it
It's possible but I don't think there's a safe way to answer this, as there were several small changes made throughout the model years with the PT cruiser, specifically the power distribution center is different from 2006 on up, both use NGC (next generation controller) which is good. You'll have to pay attention to which sensors you keep from the 04 and which you import from the 08, along with the variations in the wiring harness, if you are picking up an 08 from someone or a parts car, get all of it you, don't forget the computer still needs programming for VIN.
But as long as the plug's that plug into the fire wallare the same it should work right
If I change all three computers how could it bere programmed on the vin
Looking for a Used PT Cruiser in your area?
CarGurus has 3,186 nationwide PT Cruiser listings starting at $1,990.
Search Chrysler PT Cruiser Questions
Chrysler PT Cruiser Experts
Kelly Little Ashford