How do I reset my Pt cruisers computer?
I have a 2003 Pt Cruiser. Today while filling up with gas I forgot to close me gas
pump/ tank thing and the oil light came on. I checked my oil and closed the
tank up, but the light is still on.
The oil light is not associated with the fuel tank. IT means your oil sensor is detecting a low oil pressure. Either the switch is bad or your engine oil pressure is low due to a low oil level or faulty oil pump. Don't continue to drive it till you figure it out.
Tom I check the oil though, and there is plenty of oil
Time to have a garage see if you have oil pressure. You can drive it a short distance. Like I said, it could be a faulty switch giving a wrong signal, or a major issue. Does the engine make any new noises? Drivability problems? If not then you might be OK and just need a new switch.
No, it does not make any new noises. I literally just bought the car from a guy who owns a garage. He said that he looked everything over to make sure it was all in good condition and replaced anything that would/should need replacing for the next year.
have a p0129 code on my 2005 pt cruiser i just put in a new sensoer and the engine lite will not reset
Looking for a Used PT Cruiser in your area?
CarGurus has 3,185 nationwide PT Cruiser listings starting at $1,990.
Search Chrysler PT Cruiser Questions
Chrysler PT Cruiser Experts
Kelly Little Ashford