Breaks on a 96 crown vic
Break pedal started to get spongy, within
20+- miles or so was down to the floor. Took
it to a shop, and they said the
right(passenger) front wasn't getting any
fluid. There has been no fluid loss, and the
breaks look good.
So I'm thinking my starting point would be
the break lines to the front right side. Would
I be right in thinking?
No. Not unless you did some work on the brake lines, which it sounds like you haven't, air just doesn't get into a brake line. I hate to speculate on what the problem actually is, but the master cylinder was my first thought.
If it is still full of fluid the lines are not the problem. If full of fluid and no leaks the master cylinder is the likely cause.
Search Ford Crown Victoria Questions
Ford Crown Victoria Experts
Related Models For Sale
Used Cars For Sale