When riding on hill engine start loosing power and speed. Engine shaking on 40mh
Hi, I have a problem with my Ford crown victoria 1995. It was sitting about 1,5 years. So I
replaced plugs, plug wires, ignition coils, fuel filter, clean MAF. So still have the problem
when i riding on hill engine start loosing power and speed. And when I accelerate from 30
to 40 miles/hr engine hesitates and shaking. Any ideas? Thank You
im guessing you have a miss fire
try reading your codes
It's most likely that you have a spark plug boot that's torn or at least allowing spark to leak. Plug wires, plugs, coil pack(s) and finally the fuel filter (although not likely. TIP: You can take a spray bottle of water and dish soap and spray the plug wires at the boots and along the wires while it's running. You'll hear a "Snap" noise if you have a bad plug wire or boot.
Looking for a Used Crown Victoria in your area?
CarGurus has 1,487 nationwide Crown Victoria listings starting at $2,900.
Search Ford Crown Victoria Questions
Ford Crown Victoria Experts