Clutch pedal wont come up on my 93 ford probe could it be my slave cylinder if so do i need a whole new clutch

Clutch pedal wont come up on my 93 ford probe could it be my slave cylinder if so do i need a whole new clutch 6 Answers

Clutch 2 Answers

I have a 1995 Ford probe gt 6 cylinder if I push my clutch in and hold it at a red light the clutch tries to engage I just replaced the slave cylinder and blead it what is my problem

my 93 probe will not start when i push in the clutch,i have replaced the starter, the clutch master cylinder, use to pump the clutch a few times then it would start but not now. 4 Answers

car won't start when i push in the clutch, i am thinking when the old clutch master cylinder was leaking fluid may have gotten in to the clutch position switch, any ideas?

93 Probe 4cyl transmission install trouble after clutch replaced 2 Answers

I've installed many clutches over the years, and recently installed a new LUK clutch in my 93 Probe with 124K miles (replacing factory clutch). I was able to remove the transmission without issue, in...

My friend has a ford probe but sadly he is not online so I am trying to find answers for him when cold the car runs well when it gets hot the car judders immobiliser light comes on and it cuts out 1 Answer

My friend has a 1996 ford probe that when cold runs ok. When hot the engine judders cuts out and the immobiliser lights come on. He has had new h/t leads fitted but that seems to make no difference....