Help on wiring ground after intake gasket change.
I have changed my upper and lower intake gasket and following the
replacement i remember where all the bolts, vacuum hoses and wiring
connectors go with exception to one ground loop tab that comes out of the
main wiring harness near the alternator. I suspect it is a ground for the back
of the alternator between it and small secondary bracket to plenum or it
grounds at that plenum? Does anyone know on this 3.1 L. A picture would
help if able. This is a 99 Monte LS with 3.1. Alternator has two brackets to
first two studs of plenum and the positive side of alternator is the old hot
cable loop and not a connector. Thanks in advance.
Search Chevrolet Monte Carlo Questions
Chevrolet Monte Carlo Experts