Check Engine Light - error code T0340, Camshaft Position Sensor Blank 1
I recently had a Borla ATAK agressive exhaust professionally installed on my 2007 Corvette. I am now getting an intermittent "check engine" light. The error message is T0340, Camshaft Position Sensor Blank 1. My mechanic told me this error is normally associated with old oil. However, I had the oil changed recently, before the new exhaust was installed. What could be causing this error message?
the exhaust has nothing to do with this unless they hit a wire going to the sensor or the sensor itself installing the exhaust but the sensors should be on the front of the engine one on each head to monitor the camshaft positions. gm's seem to be common to throw these codes ( my envoy and Suzuki xl7 did similar things) get it checked at the dealer they can scan it and monitor data to see if the cams are in sync with the crank. If it's intermittent may be debris on the cam where the sensor reads the position or the sensor itself. do an engine flush if it keeps doing it then replace the bank 1 sensor and if it keeps doing it further diagnosis may be needed.
Search Chevrolet Corvette Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Chevrolet Corvette Experts