Where can i get a wire for a Honda Civic 97 EX that connects to the radiator fan from the car computer so i dont have to rig the car?
i checked my car to see if it was the radiator fan cause it was not working that wasnt it
then got a rely to see if that was the issue so all is left is the cord that connects to the
radiator fan cord to power it up but have no clue where to get one or if i should just rig the
car where i control the on and off switch to my radiator fan? any suggestions or ideas
what to do? car is a 97 honda civic Ex
Did you check the radiator cooling fan switch?
its just no power from the wire going to the fan and i have no clue where to get the wire to replace it
The relay clicks on and that is what supplies power to the cooling fan, the fan wire is normally off until the engine reaches a predetermined temp then the switch activates the relay witch in turn supplies power to the fan motor.
like i thought it was my rely so i replaced it and then had power checked it was fine so its just the main wire that connects from the rely to the cooling fan that isnt working
Just run a new wire from your relay to the fan, you can follow the wiring loom then just tape it to the harness as you go and use solder and shrink wrap for the connections.
Looking for a Used Honda in your area?
CarGurus has 352,486 nationwide Honda listings starting at $899.