98 trans am ls1 to a 60 crank sensor wiring

Dennis Sherry Jr.

Asked by Mar 18, 2015 at 08:17 PM

Question type: Maintenance & Repair

I have a 98 trans am i swap the ls1 to a 60 with a ls1 top end. everything is hooked up but
some the crankshaft sensor wires. someone cut them and IDK how they go back
together!!! Any help????

1 Answer

Jason Zane

you should be able to... just match the colors up. if dirty, clean up wires and see what the true colors are.

Your Answer

Add photo

Related Questions

  • 02 Trans Am LS1 5.7 running very poorly 5 answers

    Hello all, Here's my question/problems.......I just bought a 2002 Firebird Trans Am with the LS1 5.7 that has 135,000 miles on it from a guy who say's it just started all the below problems just aft...



    Maintenance & Repair

  • Trans am headlight doors 5 answers

    I have an 89 trans am,headlightdoors do not work,motors good ,switch replaced,fuse was blown...replaced,I do my have power to module,what now?

    1989 Pontiac Firebird Trans Am GTA


    Maintenance & Repair

  • 97 trans am won't start turns over good but won't attempt to start, please help 1 answer

    I tested fuel pressure at shrader valve it was good, changed fuel filter, changed crank shaft sensor, changed ignition coil, checked all fuses for continuity and all were good. I am looking for wh...

    1997 Pontiac Firebird Trans Am Convertible


    Maintenance & Repair

  • What is the biggest engine I can fit in a 1997 Pontiac firebird 2 answers

    What is the biggest size engine I can fit in a 1997 Pontiac firebird

    1997 Pontiac Firebird Trans Am


    Maintenance & Repair

  • ls1 swap 11 answers

    dose any one know how big of a job it is to swap a ls1 in to a 1993 3.4L camaro and a price estimate of the cost

    1993 Chevrolet Camaro


    Car Customization

Search Pontiac Questions

Pontiac Experts

#1 tenspeed
Reputation 10,350
#2 Tom Demyan
Tom Demyan
Reputation 7,600
#3 John Saffrahn
John Saffrahn
Reputation 7,040
View All