Okay guys i replaced top gasket, oil pump, timming kit took top to engineering resized crank shaft but still there is noise and overheating 1.6 rocam ... eish!!!!???

Okay guys i replaced top gasket, oil pump, timming kit took top to engineering resized crank shaft but still there is noise and overheating 1.6 rocam ... eish!!!!??? 1 Answer

i have problem I have changed oil pump but oil light still flashes and engine makes noise can any help it is rocam 1.3 2006 4 Answers

bantam rocam engine noise I have replaced oil pump but it has noise when Idling or driving

Leaking fuel , water and bakkoe is overheating. Ford rocam 1.6 1 Answer

Hi we just replaced the head gasket on bakkie , but now there seem to be a whole lot of trouble with it . After the gasket were replaced they started the bakkie it started but oil leaking from the ...

2008 Ford Bantam Rocam 1.6 Missfire 2 Answers

Hi Guys, My 1.6 Bantam Rocam 2008 misses slightly when cold and a lot when it reaches peak heat. i have installed new Spark Plugs, HT Leads, CoilPack, Petrol Pump, Head Gasket and problem is still t...

My 2008 Ford Bantam 1.6 rocam van only started "overheating" AFTER I replaced the thermostat housing. The only reason I replaced the housing is because there was a slight leak. 16 Answers

I again replaced the new thermostat suspecting that it was sticking but still no joy. I tried to remove any air from the system and also replaced the water pump and eventually had the radiatior re...