Need a cam for 7.4 L 454 2bolt main

Asked by Jan 20, 2015 at 05:13 AM

Question type: General

I have a 1986 k30 Dump 11,000 GVW,used for a chipper truck ,hauls wood n chips
while towing a 2500 lbs. chipper with 373 gears in the rears .It has A 1984 454 with
stock heads n 175 lbs. compression in each cylinder dry,190 lbs with 2 squirts of
oil.Aluminum low end tork manifold with 1.7summit roller rockers.750 cfm elbrock
which is comimg off,flow master mufflers,need a low end tork cam that sounds like [k-
Tink k-Tink k-Tink] waiting for the light to turn green!I've been told I need to show it on U
TUBE because the front tires will go  hopping 2 feet off the ground when I hit the Eaton
locker switch,while towing a chipper with full load of chip in the back in the dirt n mud
.Chevy trucks dont die they just get meaner n loud!Almost like my POPS!

1 Answer


Get a RV Cam for Good Torque and get a Holley Carburetor more powerful!

Your Answer

Chevrolet Experts

  • #1
    Tom Demyan
  • #2
  • #3
    John Carson
View All

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.