I have a 94 Silverado with a 5.7 TBI and the number six wire from the distributor is going to the number one cylinder which is completely wrong according to the firing order. anyone know why?

Asked by Apr 19, 2017 at 05:53 PM

Question type: Maintenance & Repair

5 Answers

75,485

Here is the firing order and wire placement...Is it like this?

75,485

Click on image to enlarge.

No. like i said the no.6 on the distributor is going to the no.1 cylinder. is it possible it could be wired 180 out?

Or could the cam be 180 out?

75,485

Ok, there are two different rotations on the chevys, but this is how my '95 5.7L is wired, and it is a clockwise rotation. Take the distributor cap off and have someone click the key so you can verify the rotation of the rotor. If it is clockwise like this, this would be the way it should be wired. But it can be wired the way you say it is as long as the firing order is correct, and the rotor points to #1 on the compression stroke at TDC. Is the truck running?

Your Answer

Shortcuts

Maintenance & Repair Experts

  • #1
    Tom Demyan
    Reputation
    184,250
  • #2
    dandyoun
    Reputation
    96,780
  • #3
    tennisshoes
    Reputation
    81,450
View All

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.