I have a 305 5.0 roller cam block with 350
aluminum 220cc Runners, 64cc
Combustion Chamber, 2.02 Intake
Valves/1.60 Exhaust Valves. Holley high
rise intake and 600 double pump carb.
What would I call my modify engine?
If the valves are too large they will hit the top of the cylinder bore on the 305 and then you can call it blown up.
So it not going to work
I remember reading that the 305 has a smaller bore and if large valve heads are used the valves will strike the top of the cylinder bore. I'll see if I can find the article.
There is some info here....http://www.chevytalk.org/fusionbb/showtopic.php?tid/21128/
More here....http://www.jalopyjournal.com/forum/threads/350- heads-on-305.130376/
More here....https://answers.yahoo.com/question/index? qid=20101211185849AA4b76l
Maybe find a 350 block?
Will this cam have a loaf sound to it CAMSHAFT SPECIFICATIONS Valve Lift -- Int."/Exh." .410/.427 .050" Duration -- Int./Exh. 207/214 Lobe Seperation Angle 117
You mean a lope (rumpity rump)....Maybe a little, but not sure.
This might help regarding lopey lumpy cams.....http://www.badasscars.com/index.cfm/page/ptype=product/ product_id=358/category_id=13/home_id=3/mode=prod/prd358.ht m
Search Car Customization Questions
Car Customization Experts