I have a dodge caravan se we replaced the spark plugs and wires the injectors, timing , and battery and still have to double foot it and after awhile when it did start it would idle after awhile

I have a dodge caravan se we replaced the spark plugs and wires the injectors, timing , and battery and still have to double foot it and after awhile when it did start it would idle after awhile 2 Answers

I have a 2001 PT Cruiser, ran great, went to start it 10 minutes after turning it off and it won't start. Replaced plugs and wires, new starter and new battery. All it does is click when we try to start it. Smells like sulfur under the hood in the engine compartment, when we try to start it also. 2 Answers

I have a 2001 PT Cruiser, ran great, went to start it 10 minutes after turning it off and it won't start. Replaced plugs and wires, new starter and new battery. All it does is click when we try to s...

why my 2010 dodge grand caravan keep misfiring/rough idle?, I change all the spark plugs, wires, coil, and the injectors it is the same, can't even drive it for 1min before it turn the engine 5 Answers

I change all the spark plugs, wires, coil, and the injectors it is the same, can't even drive it for 1min before it turn the engine. Please I have spend a lot please help

I have a 2005 A4 cabriolet 3.0 engine. The timing belt broke and the engine needed to be replaced. The used engine had 70,000 miles on it. Before we installed it we changed the timine belt and water pump. The car will not start. It has fuel and spark. we did a diagnostic and everything checks ok. We even tried a new computer. 2 Answers

I have a 2005 A4 cabriolet 3.0 engine. The timing belt broke and the engine needed to be replaced. The used engine had 70,000 miles on it. Before we installed it we changed the timine belt and water p...

Hi, i have a 1986 dodge ram charger and it wont start? it will start if i try for awhile but then almost dies immediatly. ive replaced the fuel filter and it has gas. The battery is also fully charged 8 Answers

Could it be the carb? it may need adjusting? if so how do i do that? Pictures would help