Your Answer:
Related Questions
-
my 2003 chevy impala 3800 has no acceleration between one third and one half pedal after half pedal it comes on hard and I have to let up to shift properly, I have changed the fuel filter and plugs and wires. Any ideas? no trouble lights or codes.... 1 Answer
Maintenance & Repair
-
so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers
so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...
1997 Chevrolet C/K 1500 Silverado Extended Cab RWD
-
Maintenance & Repair
-
Changed Maf senor, crankshaft, fuses, spark plugs. fuel filter and ignition modulator and the car starts but only runs about five mins. before stalling. No engine light comes on. No bad codes show up. Can't find any bad hoses. My mechanic teacher has looked and we can't figure it out. I am a student and can't afford to fix much more and nothing I have spent money on has worked so far. When I first put the maf in the car worked great for about a week but the transmission was still skipping 2 Answers
Changed Maf sensor, crankshaft, fuses spark plug fuel filter and ignition modulator. Checked hoses. No engine light comes on no bad codes show up. After replacing maf the car worked great for a week ...
2002 Buick LeSabre Custom Sedan FWD
-
Maintenance & Repair
-
I have a ford ranger 1987 2.9L when I press on the pedal it sputters and has no power I cleaned the throttle body it does a little better I changed the spark plugs and spark plug wires but I was wondering if any one would know what I could do to fix this problem? 5 Answers
I also put injecter cleaner in it. it seems like power comes back for a while but goes back to sputtering with harldy any power
1987 Ford Ranger XLT Standard Cab 4WD SB
-
Maintenance & Repair
-
I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control module. We coming to a stop sign it will stall and sometimes when just sitting still. Sometimes it will start right back up and other times it takes several tries. I also have the oxygen sensor on order and it should be here tomorrow. Fuel pressure tested perfectly. No black smoke, no smell of rotten eggs or the cat glowing red. The only code that comes up is PO420. 4 Answers
I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control m...
1999 Chevrolet Blazer 4-Door 4WD
-
Maintenance & Repair
Search Maintenance & Repair Questions
CarGurus Experts
-
#1Gene ArnettReputation244,980
-
#2RowefastReputation183,560
-
#3dandyounReputation169,260
Know more, shop wisely
SearchContent submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.