97dodgeram1500 what sensor or fuses would cause it not to fire

Asked by Mar 07, 2014 at 10:17 PM

Question type: Maintenance & Repair

I put anew crank shaft sensor in,a new pickup module new rotor and distribitur cap and my truck still is not firing is there a sensor bad? and would my o2 sensor cause my truck to not fire?

2 Answers

19,015

no on the o2 sensor, try battery disconnect and reconnect ASD automatic shut down may have happened , or look at fuses under hood for one burnt from see thru end

315

I would first check to see if you can hear your fuel pump prime when you turn the key forward 1 time. If you cannot hear it I would look under the driver side dash and check the ecm fuse, fuel pump fuse and then the fuel pump relay. Also make sure you have all plugs and wires installed correctly.

Your Answer

Add photo

Related Questions

  • what could be causing my 1992 ford festiva not to fire? 3 answers

    i'm not getting any fire to my coil

    1992 Ford Fiesta

    -

    Maintenance & Repair

  • What could cause no fire from the coil? 5 answers

    We have a Honda Accord EX that sometimes will not run. It turns over fine, but will not run. The problem has been going on for 5 years ( every few months, then weeks, then days), and now it will not s...

    Honda Accord

    -

    Maintenance & Repair

  • 1992 BUICK CENTURY 3.3 V6 NOT GETTING FIRE TO THE PLUGS 3 answers

    WHAT COULD CAUSE IT NOT TO GET FIRE TO THE PLUGS

    1992 Buick Century

    -

    Maintenance & Repair

  • fire 10 answers

    I replaced points and set rotor button put everything back together,turns over fast but wont fire..what can i try

    1986 Ford F-150 STD Standard Cab LB

    -

    Maintenance & Repair

Shortcuts

Search Maintenance & Repair Questions

UK Questions

Are you a UK consumer? CarGurus now has a discussion forum in the UK.

Maintenance & Repair Experts

#1 Tom Demyan
Tom Demyan
Reputation 154,910
#2 FordNut
FordNut
Reputation 105,670
#3 dandyoun
dandyoun
Reputation 86,480
View All