truck only starts on ether
new fuel pump & filter (55 psi run 62psi start). new plugs, wires cap & rotor. removed, cleaned & tested the spider injectors. new gaskets & seals. new mas air flow sensor. checked all fuses & relays. once started runs like new.could it be the ignition starter switch?
No would not be switch if it will start with stating fluid,sounds like it may be a bad spider injectors.
Just spent another $ 100.00 this time on a new ignition starter switch. In addition to special sockets & replaced the faulty switch. Starts fine & runs great. PS. I cleaned and tested all 8 injectors earlier. We all know GM has had problems with ignition switches. Stupid me I should have started there!
Good to here you got it.
01 S10 blazer with same issue. I don't understand how it could be the ignition if it'll crank on ether. without a spark, even ether won't burn. How could ether help an ignition problem?
Looking for a Used C/K 2500 in your area?
CarGurus has 238 nationwide C/K 2500 listings starting at $2,900.
Search Chevrolet C/K 2500 Questions
Chevrolet C/K 2500 Experts