what do the casting # c l 26, c l 15, c l 11 mean
1994 dohc had a blown head gasket, head gaskets have been replaced, I just started
finishing up on this. Installing camshaft sprockets & timing belt. Rotate crankshaft
clockwise, crank stops, rotate counter clockwise, about the same degrees, crank
stops. Look down intake ports, one direction intake& exhaust valves make contact, the
other direction this happens in a different cylinder between # 3 & # 5 cylinder. I think
the camshafts were installed in corect location but cams have j or k markings. What
can I do to remedy this or these issues.
Hold up the cams are different. The stopping is the pistons hitting the valves. Use caution or you will bend them.
Search Dodge Stealth Questions
Dodge Stealth Experts