03 neon stalling
I recently purchased an 03 neon SE and it didn't start, I fixed the wiring harness to the ECU and now it runs and drives fine as long as I don't put too much pressure on the engine, If I do it'll throw a crank position sensor intermittent code and possible stall. The voltage is 14volts with everything running full tilt and stays there, I changed the crank and cam sensor as well which didn't fix the issue. If I put it in park and rev it high it'll either cut right out or go really low rpms and almost choke itself.
Turns out there were several pinched/broken wires on the black and white plugs, also found the new crank sensor not being oem was a problem, put oem in haven't had an issue for months.
Search Dodge Neon Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Dodge Neon Experts