i have year 2000 durago that has two gasges where u can put antofreeze ..im i suppose to put water in one and antofreeze in other ...i dont know what to do ..the engine light is on now??
Hold on a minute..maybe I can help. What is 'gasges'?? If you mean radiator and overflow, sometimes called the 'puke tank" you put antifreeze in both. Either pre-diluted from the bottle, or 50-50 water and 100% anti-freeze (increase that ratio to more anti-freeze if you live someplace where it gets 40 below, most places in the US 50-50 is fine). The radiator should be full. Almost all the way up to the cap. If you can see cooling fins, it's low. If you can't get your finger in to the coolant it's low. In the overflow, or holding tank, usually plastic and a small hose going to radiator, COLD, it should be about 1/4 full. Both accept coolant/water. NEVER NEVER pop the radiator cap off unless the engine is COLD.
The cap on the passenger side is the reservoir for the windshield washer and the one on the drivers side is for coolant. The cap on the hose from the engine is for filling up the whole system when you change out the coolant and for burping the system afterwards.
If the check engine light is one you can get the code by turning the ignition key fast 3 times from of to on, leaving it on on and the code will appear in the dashboard where the odometer is. Then you can go to this site to see what the code means: http://www.wjjeeps.com/faultcodes.htm
What would happen if I put my antifreeze and coolant 50/50 in the cap on the hose from the engine with out changing out the coolant and burping the system afterward what is burping the system is
Looking for a Used Durango in your area?
CarGurus has 22,889 nationwide Durango listings starting at $1,100.
Search Dodge Durango Questions
Dodge Durango Experts