When I hook up a computer to my truck to figure out some problems all the computer tells me to is to make sure the ignition key is on. I turn the key on and I still get the same reading from the computer. Anybody know what might be the problem so I can get a diagnostic reading??
Go to your basics - There needs to be power at the OBD2 connector for the scanner to negotiate with the on board computer system - Check fuses. If all are good check pin 16 for power and 4/5 for ground. If all checks out your scnner connection might be corroded or not connecting properly to the connector on the vehicle.
Search Chevrolet Silverado 2500HD Questions
Chevrolet Silverado 2500HD Experts
Related Models For Sale