Why is the ac control blinking on my 07 impala
Condition/Concern Some customers may comment that the Air Conditioning (A/C) indicator on the Heating Ventilation and Air Conditioning (HVAC) Control Module flashes then turns off after they press the A/C button. Others may comment that the Recirculation indicator on the HVAC Control Module flashes then turns off after they press the Recirculation button. This is normal operation for the HVAC Control Module and indicates that the A/C or Recirculation function is not available at this time. Reasons that the A/C may not be available (calibrated values vary by program) are listed below. Consult the appropriate vehicle Service Information (SI) for detailed HVAC Description and Operation: • Ambient Air Temperature is too low (if equipped with Ambient Air Temperature Sensor) • Vehicle voltage less than 9.5 volts • Refrigerant Pressure too low • Refrigerant Pressure too high • Engine Coolant Temperature too high • Engine is not in RUN • HVAC Control Head is in the OFF position Reasons Recirculation may not be available: Mode switch in Floor, Defog or Defrost mode. The reason(s) A/C is currently disabled can be viewed with a Tech 2® by navigating to HVAC Data display and viewing the "A/C Permission" parameter. Recommendation/Instructions Do not replace the HVAC Control Module for a flashing A/C Indicator or flashing Recirculation Indicator, as this is normal operation.
So what do I do
Looking for a Used Impala in your area?
CarGurus has 25,636 nationwide Impala listings starting at $950.
Search Chevrolet Impala Questions
Chevrolet Impala Experts
Related Models For Sale