why will the truck not stay runing?
bought truck cheap. had blown intake gasket(repaired), changed plugs, wires, cap and rotor, fuel filter and fuel pump changed about a year ago before I bought truck. vehicle starts when cold but stalls out. prior to changing plugs and wires vehicle would start run till warm or hot then shut off. need help don't know where or what to check next.
What year model?
01 blazer with 4.6l vortec
Ugh. Spider injectors. Are you positive that you have all the vacuum hoses connected correctly and that all the plug wires were reinstalled correctly?
definitely put everything back the way it was suppose to be plug wires installed correctly, correct order but did notice vacuum hoses were a lil dried out. do you think they could cause the issue with starting and stalling? also would they stop vehicle from restarting after warm? I ask that cause that was the issue before changing everything.
Faulty/dirty idle air control valve possibly could be causing both issues.
Thank you for your help. Where can I find the idle air control valve
http://www.1aauto.com/idle-air-control-valve/i/1aisc00031? f=683504&y=2001#video-placeholder -- check out the video. It not yours but should give you an idea what you are looking for
Looking for a Used Blazer in your area?
CarGurus has 1,135 nationwide Blazer listings starting at $1,995.
Search Chevrolet Blazer Questions
Chevrolet Blazer Experts