93 jeep grand cherokee overdrive working backwards
i have a 93 jeep grand cherokee with a 4.0 straight 6. automatic. when i press the overdrive and the light comes on
my rpms will drop 250 rpms at 60+mph. when i press the od off switch and the light goes off then it raises the
rpms. either way its still not dropping enough rpms. was told at 65 i should be running 2000 rpms. any advise?
From what your saying appears that your OD is working properly. A 250 RPM drop is about right.
how many rpms am i supose to be running at 65 mph?
2000 at 65mph
ok my jeep runs lil over 3000 at 65
That's pretty high are you shifting into all the gears?
sounds like i am
Check your tranny fluid for color and level. You can also do this check on tranny. Pull your tranny dipstick and with a very clean white cloth wipe the dipstick down. If you notice a lot if black colored residue you have excessive internal wear. If that is the case you'll need to look closer there. How many miles on your jeep?
theres around 30,000 on this tranny
Perform the check for debris on the transmission dipstick. With that amount of miles you should not have any significant wear. You should be able to use some additive to the transmission to purge out any debris. Sea-Foam makes an awesome product that works well for these types of issues.
thank you i will def try it
In my 94 Jeep grand cherokee, when the light is off it means the od is on, when the light is on it means the od is off
I have a question. My 93 jeep grand cherokee Laredo does not have a overdrive button to push off what do I do?
Can somebody actually tell me how to tow a vehicle, another vehicle with my Jeep it doesn't have overdrive shut off. What do I do
Looking for a Used Grand Cherokee in your area?
CarGurus has 73,144 nationwide Grand Cherokee listings starting at $1,200.
Search Jeep Grand Cherokee Questions
Jeep Grand Cherokee Experts
Related Models For Sale