how to change front signal bulb for 2008 montana

Asked by Jun 24, 2015 at 11:58 AM about the Pontiac Montana

Question type: Maintenance & Repair

How do you get the lense out to replace bulb

3 Answers

http://www.pontiac.com/content/dam/pontiac/northamerica/usa/nscwebsite/en/Home/Owners/Owner_Resources/Manuals/en/us/2008/montana/2008-pontiac-montana-sv6-owners-manual.pdf

5 of 5 people found this helpful.

If you don't have your owners manual download that link, chapter 5 Page44. If you do have it, just look there it has step-by-step instructions. I will copy and paste it anyway

5 of 5 people found this helpful.

The owners manual has images i can't copy from a pdf file.Sidemarker Lamp Open the hood. See Hood Release on page 5-11 for more information. 2. Remove the headlamp retainer pin (A) by turning it towards the headlamp assembly and pulling it straight out. 3. Remove the screw (B) from the top of the headlamp assembly. 4. Pull the assembly away from the vehicle. 5. Disconnect the socket wiring harness connector from the headlamp assembly. 6. Turn the bulb socket counterclockwise to remove from the assembly. 7. To replace a headlamp bulb, disconnect the bulb socket wiring harness and connect to the new bulb socket. To replace a sidemarker bulb, pull the old bulb out and push a new bulb in. 8. Reinstall the bulb socket by inserting into the bulb assembly and turning it clockwise to secure. 9. Reverse the steps to reinstall the headlamp . Follow the Steps 1 through 4 to remove the headlamp assembly. See Headlamps and Sidemarker Lamps on page 5-42 for more information. 2. Turn the bulb socket counterclockwise to remove from the assembly. 3. Pull the old bulb out from the bulb socket. 4. Replace with a new bulb. 5. Reinstall the bulb socket by inserting into the bulb assembly and turning it clockwise to secure. 6. Reverse the steps to reinstall the headlamp assembly. A. Stoplamp/Taillamp B. Turn Signal Lamp C. Back-up Lamp Bulb 5. Turn the bulb socket counterclockwise to remove. 6. Replace the bulb by pulling the old bulb out of the socket and gently pushing in a new bulb. 7. Replace the bulb socket by inserting and turning clockwise to secure. 8. Reinstall the taillamp assembly by inserting the outboard locating/retaining pins until the lamp is seated. 9. Secure with the inboard screws Bulb part number Turn Signal, and Parking Lamp 3157NAK

2 of 2 people found this helpful.

Your Answer

Montana

Looking for a Used Montana in your area?

CarGurus has 277 nationwide Montana listings starting at $1,950.

ZIP:

Pontiac Montana Experts

  • #1
    Countrygal77
    Reputation
    2,110
  • #2
    Robert Reed
    Reputation
    1,500
  • #3
    Jim Space
    Reputation
    780
View All

Related Models For Sale

Used Honda Odyssey
319 Great Deals out of 23,522 listings starting at $950
Used Chevrolet Uplander
811 listings starting at $2,499
Used Dodge Grand Caravan
196 Great Deals out of 26,952 listings starting at $1,750
Used Pontiac Firebird
10 Great Deals out of 784 listings starting at $2,500
Used Pontiac Bonneville
518 listings starting at $1,799
Used Toyota Sienna
301 Great Deals out of 26,329 listings starting at $1,700
Used Dodge Durango
295 Great Deals out of 21,140 listings starting at $2,195
Used Ford F-150
2,245 Great Deals out of 179,994 listings starting at $1,300
Used GMC Envoy
56 Great Deals out of 2,116 listings starting at $1,500
Used Dodge Caravan
593 listings
Used Chevrolet Impala
479 Great Deals out of 33,615 listings starting at $777
Used Ford Explorer
806 Great Deals out of 62,574 listings starting at $1,000
Used Jeep Grand Cherokee
863 Great Deals out of 70,094 listings starting at $1,045

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.