- Home
- / Questions
- / Ford
- / F-250 Super Duty
- / What causes A/c clutch not to ingauge
What causes A/c clutch not to ingauge
Asked by Javeon Jan 15, 2014 at 09:20 PM about the Ford F-250 Super Duty
Question type: Maintenance & Repair
A/c was working fine, mechanic change the wire harness and now the clutch would not in gauge. Hooking it up directly clutch it would in gage, when a/c is turn on from inside you can here rpm drops like its on but a/c isn't in gauging.
Please assist in solving this problem.
2 Answers
Your Answer
Related Questions
-
What causes A/c clutch not to ingauge 2 answers
A/c was working fine, mechanic change the wire harness and now the clutch would not in gauge. Hooking it up directly clutch it would in gage, when a/c is turn on from inside you can here rpm drops lik...
Ford F-250 Super Duty
-
Maintenance & Repair
-
A/C blower switched from panel to defrost during acceleration 3 answers
The airflow is switched from panel to defrost during acceleration. The airflow switches back when I let off the accelerator. Had anyone else experienced this and have a remedy?
2006 Ford F-250 Super Duty XLT Crew Cab 4WD SB
-
Maintenance & Repair
-
What wire on the computer goes to the AC relay in the fuse box to turn the clutch on
All relays fuses Hi-Lo works and has power computer knowledge is to turn on power to the clutch but no power from computer to one side of the relay to turn on clutch AC full put jumper wire in whe...
2010 Ford F-250 Super Duty XL SuperCab 4WD
-
Maintenance & Repair
-
I have a ford f250 SD 4x4. When I accelerate I get a vibration under the truck but as I reach the higher gears it stops...any idea's on what causes this? 3 answers
I have a ford f250 SD 4x4. When I accelerate I get a vibration under the truck but as I reach the higher gears it stops...any idea's on what causes this? Also how do I engage and disengage the manual ...
2003 Ford F-250 Super Duty
-
Maintenance & Repair
-
Failure to start. Turn key and get either the 'click clic click' of the solenoid not engaging, or a single clunk and all the electrical goes dead. 3 answers
The battery is new and tests good. Wiggling the ground wires seems to affect whether I get clicks or clunk. Truck was driven without incident an hour prior to not starting. Used a continuity tester on...
2001 Ford F-250 Super Duty XLT LB
-
Maintenance & Repair
Shortcuts
Search Ford F-250 Super Duty Questions
Ford F-250 Super Duty Experts
-
#1Tracy HooksReputation860
-
#2kbroReputation640
-
#2Tom DemyanReputation640
Related Models For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.