crank no start, no spark, fuel pressure good
crank no start, fuel pressure 60 psi, no spark.
I have power to the ignition coils, not getting a ground signal to coils from
PCM. No codes
asd relay is energizing properly, cam and crank sync look great through
Is there a known area of chaffed wires, or do I have a possible issue with
Thinking SKIM, the Sentry Key Immobilizer. If recognized, it sends a signal to the BCM over the PCI communication bus, which then tells the PCM that it's OK to start. So an anti-theft device issue. It will crank, as you describe, but not fire
But what year? I could be way off base
2003 3.5 liter , no BCM codes either , and my Snap On Solus Pro shows that the SKI is not in theft mode
Ok. just a thought... good luck, really
Well have a 2000 m only have spark on one coil and replaced can sensor and crankshaft sensor
Car turns over spray staterfluid in breather no fire at all what's wrong.
Looking for a Used 300M in your area?
CarGurus has 150 nationwide 300M listings and the tools to find you a great deal.
Search Chrysler 300M Questions
Chrysler 300M Experts
Related Models For Sale