Whats the difference when rebuilding a 4L60E 4x4 and the standard 4L60E? Just changing the shaft?

Whats the difference when rebuilding a 4L60E 4x4 and the standard 4L60E? Just changing the shaft? 2 Answers

I have a 94 GMC Jimmy with new fuel pump and it starts fine an everything just looses power when I press the gas or when I have some RPMs higer than idleing. What could be the problum? 1 Answer

It will start idle with no problums I can give it some gas an drive 2 feet befor it looses power, I think its the regulator or fuel injectors were the engine is flooding or something cuz the fuel...

I have a 2000 Jimmy and the 4 wheel drive won't work. Replaced dash switch, vacuum actuator. Has vacuum but still won't engauge. What do you suggest now? 2 Answers

Took out the control module on the passenger side behind panel under glove box, and cleaned one corroded terminal also. Could this part be faulty? Sick of throwing parts at it.

I replaced the front rotors on 97 GMC Jimmy and now they are grinding the backplate/abs sensor assembly, can anyone shed some light on why? 4 Answers

I replaced the front rotors on 97 GMC Jimmy and now they are grinding the backplate/abs sensor assembly. Not sure if I am missing something. I didn't compare the old rotors with the new ones before ...

why would the battery drain in my 1998 Jimmy when i replaced the alternator and battery. 4 Answers

I replaced the alternator and battery. however the battery wont stay charged and drains if i give it gas or hit the brakes.