2002 Blazer "Check Engine Soon" light is on but scanner doens't detect any codes. What do I do now?
Asked by thighland Mar 02, 2016 at 08:44 AM about the 2002 Chevrolet Blazer
Question type: Maintenance & Repair
2002 Blazer "Check Engine Soon" light is on but when we hooked up the scanner it doesn't show any codes. I need to get it inspected, but I can't if I can't find out what's wrong.
6 Answers
Rowefast answered 2 years ago
It may be that at the ALDL connector has no power for the scanner? Something not working electrically inside the vehicle?
thighland answered 2 years ago
car runs great and no apparent electrical problems. Only thing I know is wrong is slight power steering fluid leak. Everything else is good.
Rowefast answered 2 years ago
Gotta get a code or it is a guessing game. Would need someone to look at it to see why the light is on.
tennisshoes answered 2 years ago
If it is the yellow check engine light that is a maintence reminder light, time for an oil and filter change then reset the light, if it is the red light and no codes then there is a failure in the engine control systems, check the fuses and don't forget those under the hood, if none are blown then you will have to go to a shop for further testing.
thighland answered 2 years ago
It's a yellow light. You think an oil and filter change will do the trick?
Your Answer
Related Questions
-
2002 Blazer "Check Engine Soon" light is on but scanner doens't detect any codes. What do I do now? 6 answers
2002 Blazer "Check Engine Soon" light is on but when we hooked up the scanner it doesn't show any codes. I need to get it inspected, but I can't if I can't find out what's wrong.
2002 Chevrolet Blazer
-
Maintenance & Repair
-
1989 Chevy Blazer, just had complete service performed 2 weeks ago. For the first time, my "check gages" light came on. I noticed the oil pressure was zero. Never saw this before. I check the oil (and while it said to add oil (weird since I just had the service), it still had oil on the dip stick. Is driving dangerous? Will my motor burn up? What shall I do? 2 answers
1989 Chevy Blazer, just had complete service performed 2 weeks ago. For the first time, my "check gages" light came on. I noticed the oil pressure was zero. Never saw this before. I check the oil (a...
1989 Chevrolet Blazer
-
Maintenance & Repair
-
97 Chevy blazer had an complete tune up . BUT my check engine light came right back on again reading misfire what else could it be 2 answers
I have a 97' Chevy Blazer. My check Engine light came on bout a week are so ago. But during that time, during that week I'd went to auto parts store were they said I'd a misfire. So I'd gotten a ...
1997 Chevrolet Blazer LS 4-Door RWD
-
Maintenance & Repair
-
how do you reset the airbag light on a 1998 chevy blazer 5 answers
the airbag light on my chevy blazer came on - how do I reset it?
1998 Chevrolet Blazer
-
Maintenance & Repair
-
Engine check light is always on. 9 answers
Engine check light is always on, but if battery is disconnected when engine is off, after 10 minutes or so connect again the battery then turn engine on, after sometime about 30 minutes the Engine Ch...
1996 Chevrolet Blazer LT 4-Door 4WD
-
Maintenance & Repair
Looking for a Used Blazer in your area?
CarGurus has 709 nationwide Blazer listings starting at $900.
Shortcuts
Search Chevrolet Blazer Questions
Chevrolet Blazer Experts
-
#1Andrew OlsenReputation2,260
-
#2yetilikesbeerReputation1,550
-
#3RowefastReputation1,150
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.